The definition of the disabled toilet grab bar

Disabled toilet grab bars are mainly used on both sides of corridors, toilets, public toilets and other places. Disabled toilet grab bar is a public facility to help the elderly and the disabled walk up and down. It is applicable to, nursing homes and other places. The panel is PVC and the lining is aluminum alloy. The hand part of the anti-collision handrail meets the requirements of human mechanics. The overall color of the disabled toilet grab bar meets the requirements of and has uniform color. The aluminum alloy parts are made of primary high-quality aluminum ingot extrusion steel with sufficient support and anti-collision requirements. Disabled toilet grab bars are generally used by disabled people with inconvenient legs and feet. A special toilet for the disabled should be set next to the public toilet or in an appropriate position. After setting a special toilet, it can replace the toilet space for the disabled in the public toilet. When the flush door is selected for the special toilet, the door leaf shall be opened outward, and the net width of the passage after the door leaf is opened shall not be less than 0.80M. The door handle shall be a horizontal and straight handle, the door lock shall be equipped with a door latch that can be used inside and outside the door, and a door closing handle shall be set inside the door leaf. Handrails for the disabled should be set on both sides of ramps, stairs and beyond two floors of steps and three sides around the elevator, and the handrails should be connected. The shape, specification and color of the handrail for the disabled shall be easy to identify and grasp. The cross-section size of the handrail shall be 35mm to 50mm, and the clearance from the inner side of the handrail to the wall shall be 40mm. Handrails of ramps, stairs and steps shall extend horizontally for more than 0.30m at the beginning and end. The handrail for the disabled shall be made of high-quality wood or other good materials. The handrail must be firmly installed and can accept the weight of the body. The floor of the toilet shall be flat, not smooth, not ponding, and without concave convex difference. A clothes hook with a height of 1.20m shall be set in the toilet. The diameter of the grab bar is 32mm to 40mm, and the inner side is 40mm away from the wall. The grab bar shall be firmly installed and can accept the weight of the body.